Vertical ring wet strong magnetic field structure and characteristics of magnetic separator
Views: 4 Author: Site Editor Publish Time: 2016-09-27 Origin: Site
Vertical ring wet strong magnetic field magnetic separator is mainly composed of a metal ring (8 divided into 40 sieve gas grid, grid there a spherical medium) and a "day" glyph magnetic system composed of 4.Vertical rotating ring between the two poles, lower by magnetic field, pulp by lower feed device inside the ring 2 through the ring round sieve grate 11 to into the ring and ring weakly magnetic particles adhesion in medium surface, with the circle turn the ascension to the top of the magnetic field strength is very weak, by the high pressure water 7 people concentrate slot 6.Non-magnetic mineral grains due to the gap from the magnetic effect by media ball, tailings in slot 13.
This kind of strong magnetic field magnetic separator is "day" type the closing of the magnetic system, short magnetic circuit and magnetic flux leakage is small, be able to get higher magnetic field intensity and magnetic field gradient, up to 1.4 million/m.
Vertical ring wet strong magnetic field magnetic separator's main advantage is to overcome the lie ring (ring) magnetic separator easy jam faults, this is because the media ball with circle rotate within the ring rolling, the directional arrangement, which is formed by the damaged medium magnetized had demagnetizing effect, thus improve the blocking phenomenon.
This magnetic separator test show that: for hematite, siderite, ilmenite, chromite, wolframite, tantalum niobium ore, manganese ore, garnet, pyroxene, hornblende, geometric magnetization coefficient is greater than 15 x 10-6 cm 3 / grams of fine weakly magnetic minerals don't choose, can get good separation indexes.
Factors influencing the vertical ring magnetic separation pause other are: magnetic field intensity and magnetic field gradient, magnetic medium, rotational speed, flushing water of equipment, etc.
Q Are you a manufacturer or a trader?
A
We have our own foundry ,forging factory and machinery shop located in Liaoning Province, China.
Q What can you do for customer?
A
One Stop Service
1).Manufacturing and supply various machinery parts.
2). Technical analysis and design
3).Factory audit, on-site production supervision, in-time feedback, pre-shipment quality inspection
Q How could you commit the product quality?
A
1) all our factories were ISO certified.
2) more than 50% of New Densen’s products were sold to worldwide top 500 companies
which located in North American, Western Europe, and Japan.
3) New Densen’s QC engineers will do on-site supervision and before EX-work quality inspection. New Densen will issue inspection reports for customers’ approval before EX-work. New Densen will be responsible for its reports and every parts no matter how long sold to customers.
Q How long shall we get the quotation?
A
Processing time for inquiry: 1-3 working days.
Q What's the process of developing a new steel casting product?
A
The procedure for new project develop as below:
1. Technical department analyze the drawings all details
2.Pattern design and manufacture
3.Casting Process
4.Quality Control inspect the casting parts
5.Issue inspection report for customer to check quality
6. After inspection report approved, Logistics Department help arrange the shipping to customer
English
