Views: 13 Author: Site Editor Publish Time: 2016-06-15 Origin: Site
The liquid metal molding process is called casting, poured into the liquid alloy in the mold of a good custom,When the temperature decreases the formation of molded castings.Sand casting, die casting, investment casting, shell casting, lost foam casting, low pressure casting, gravity casting is to distinguish according to the method of casting process.
By casting molding parts are generally valve castings, valve bonnet and hand wheel are such parts.Or greater cost savings are generally parts casting, design standards and meet the requirements of all premise.Forging and casting molding process is relatively molding process, generally on a smaller valve or special industry and specifically asked if the owners use.
Body, bonnet, stem, the valve (gate) is the main valve parts,in accordance with the requirements of the standard valve stem is forging,of course there because it can save some cost, using the rolling bar replaced,the valve used under low pressure experience doing this is acceptable.The stem (gate) and the valve body and bonnet as smaller is forging even bar direct processing it.Casting for some of the larger head. Our usual valve casting material is divided into: carbon steel, alloy steel and stainless steel. Carbon: WCA, WCB, WCC; alloy steel: WC6, WC9; Stainless Steel: CF8, CF8M, CF3, CF3M. Of course, these special materials copper, titanium, titanium alloy and so on will be used.
Forging metal blank is pressure by forging machinery to carry out, eventually causing the material to produce plastic deformation processing methods have mechanical properties, shape and size of forgings obtained. Stamping and forging belong to plastic processing properties, collectively forging.
Machinery manufacturing to forging common processing forming. Metal cast loose, the holes can be welded by forging methods to get rid of, as compared with the mechanical properties of the same general material castings forgings performance will be better. Mechanical load is high, the work demanding spares available rolled sheet, profiles or welded external shape, the rest of the use of forgings.
Q Are you a manufacturer or a trader?
A
We have our own foundry ,forging factory and machinery shop located in Liaoning Province, China.
Q What can you do for customer?
A
One Stop Service
1).Manufacturing and supply various machinery parts.
2). Technical analysis and design
3).Factory audit, on-site production supervision, in-time feedback, pre-shipment quality inspection
Q How could you commit the product quality?
A
1) all our factories were ISO certified.
2) more than 50% of New Densen’s products were sold to worldwide top 500 companies
which located in North American, Western Europe, and Japan.
3) New Densen’s QC engineers will do on-site supervision and before EX-work quality inspection. New Densen will issue inspection reports for customers’ approval before EX-work. New Densen will be responsible for its reports and every parts no matter how long sold to customers.
Q How long shall we get the quotation?
A
Processing time for inquiry: 1-3 working days.
Q What's the process of developing a new steel casting product?
A
The procedure for new project develop as below:
1. Technical department analyze the drawings all details
2.Pattern design and manufacture
3.Casting Process
4.Quality Control inspect the casting parts
5.Issue inspection report for customer to check quality
6. After inspection report approved, Logistics Department help arrange the shipping to customer