Purchasing the matters needing attention of gas ball valve
Views: 3 Author: Site Editor Publish Time: 2016-09-26 Origin: Site
Now more and more domestic gas pipeline, and today to introduce purchasing gasball valve precautions:
1, as soon as possible to reduce the valve structure height (refer to the centerline of the valve flow section to height) on the top of the valve, to reduce the depth of buried pipes.
2, at the top of the valve should be equipped with fully enclosed open-close indicator, is advantageous for the check valve state, is one of the important conditions for safe operation.
3, full size design, reduce the flow resistance, facilitate sweeper through a pipe or pipe detector, should also meet the constantly lose enclosed tapping machine on the pipe opening.
4, reliable sealing performance, soft seal valve under the nominal 1.1 times the rated working pressure are not allowed to have any internal leakage detection, hard seal valve under the nominal 1.1 times the rated working pressure allows the internal leakage of less than 13 dnmm3 / s.This requirement is strict, such as: within 500 mm of the gas valve nominal diameter of leakage is not greater than 9 ml/min, the leakage is absolutely not allowed.
5, the use of the underground pipe network of gas valve shell shall be corrosion resistant, Suggestions according to the transfer medium in pipeline and the use of pressure with different shell material.
6, the valve parts design should consider to use less maintenance or free maintenance structure, minimize maintenance and maintenance workload, reduce the enclosed by the valve overhaul and maintenance road traffic.
7, the vast majority of underground pipeline valve for artificial opening and closing, the requirements of the valve opening and closing torque is small, the entire circle number is reasonable, can cut off the gas source as soon as possible after the accident.
Q Are you a manufacturer or a trader?
We have our own foundry ,forging factory and machinery shop located in Liaoning Province, China.
Q What can you do for customer?
One Stop Service
1).Manufacturing and supply various machinery parts.
2). Technical analysis and design
3).Factory audit, on-site production supervision, in-time feedback, pre-shipment quality inspection
Q How could you commit the product quality?
1) all our factories were ISO certified.
2) more than 50% of New Densen’s products were sold to worldwide top 500 companies
which located in North American, Western Europe, and Japan.
3) New Densen’s QC engineers will do on-site supervision and before EX-work quality inspection. New Densen will issue inspection reports for customers’ approval before EX-work. New Densen will be responsible for its reports and every parts no matter how long sold to customers.
Q How long shall we get the quotation?
Processing time for inquiry: 1-3 working days.
Q What's the process of developing a new steel casting product?
The procedure for new project develop as below:
1. Technical department analyze the drawings all details
2.Pattern design and manufacture
4.Quality Control inspect the casting parts
5.Issue inspection report for customer to check quality
6. After inspection report approved, Logistics Department help arrange the shipping to customer