EnglishEnglish
  contact@sydensen.com

News Center

Pneumatic ball valve and worm wheel rotary valve has any advantage

Views: 3     Author: Site Editor     Publish Time: 2016-07-25      Origin: Site

Ball valve with pneumatic actuator is pneumatic ball valve, because the execution speed is relatively fast, 0.05 seconds / time is the fastest speed can reach, so the gas moving fast shut-off valve is pneumatic ball valve's nickname, usually equipped with various accessories in the gas valve use, such as solenoid valves, air FRL limit switch, positioners, control box, can make local control and remote centralized control is easy to implement, the switch of the valve in the control room can control directly, do not need to run to the scene or at high altitudes and the danger zone to manual control, so that the human resources and time and safety of also has the greatly improved.
Pneumatic ball valve and worm wheel rotary valve has any advantage
The pneumatic ball valve is evolved from the plug valve. Both have the same rotation of 90 degrees, the difference is that the body of the plug valve presents a ball shape, a circular through hole or channel through its axis. The ratio of the spherical surface and the channel port should be such that when the ball is rotated 90 degrees, the inlet and outlet should be all spherical, thereby cutting off the flow. Pneumatic valve compared to manual, worm wheel and worm gear rotating ball valve is the biggest advantage is that the pneumatic ball valve can be large aperture configuration, so the gas pneumatic ball valve is widely used in petroleum, chemical, power generation, paper, atomic energy, aerospace, rockets etc. industries.
 

  • Q Are you a manufacturer or a trader?

    A
    We have our own foundry ,forging factory and machinery shop located in Liaoning Province, China.

  • Q What can you do for customer?

    A
    One Stop Service
    1).Manufacturing and supply various machinery parts.
    2). Technical analysis and design 
    3).Factory audit, on-site production supervision, in-time feedback, pre-shipment quality inspection

  • Q How could you commit the product quality?

    A
    1) all our factories were ISO certified. 
    2) more than 50% of New Densen’s products were sold to worldwide top 500 companies 
    which located in North American, Western Europe, and Japan.
    3) New Densen’s QC engineers will do on-site supervision and before EX-work quality inspection. New Densen will issue inspection reports for customers’ approval before EX-work. New Densen will be responsible for its reports and every parts no matter how long sold to customers.

  • Q How long shall we get the quotation?

    A
    Processing time for inquiry: 1-3 working days.

  • Q What's the process of developing a new steel casting product?

    A
    The procedure for new project develop as below:
    1. Technical department analyze the drawings all details 
     
    2.Pattern design and manufacture
     
    3.Casting Process
     
    4.Quality Control inspect the casting parts
     
    5.Issue inspection report for customer to check quality
     
    6. After inspection report approved, Logistics Department help arrange the shipping to customer
     Densen Group subsidiary:

Contacts-Headquarters
Floor 21, Block B, Fortune Building, No. 18 Xinghua Bei Street , Tiexi District, Shenyang, 110025, China.

86 15541524932
contact@sydensen.com
Follow Us

Copyright © Densen Group, All Rights Reserved.