Views: 43 Author: Site Editor Publish Time: 2016-10-12 Origin: Site
Aluminum alloy hot top induction cooker casting technology is how to?Hot top electromagnetic casting method and the difference between ordinary electromagnetic casting process adopts special shield structure, and its internal made from refractory heat at the top end of liquid top solution forming, namely hot top with the function of the shield.Hot top electromagnetic casting technology has the following advantages:
1, compared with the electromagnetic casting technology, the heat have the function of the constraint of liquid forming.Metal level position control by contrast more easily, and is conducive to the stability of the liquid column height.
2, heat the top section is gradually increasing because of from bottom to top, in the process of casting metal burn note the amount of increase or decrease the effect of liquid column height is significantly weakened, so as to enhance the stability of the liquid column height and ingot casting size.
3, heat is advantageous to the liquid metal casting, reduces the impact of the water flow of metal liquid column.
4, due to the liquid - solid interface of liquid column still rely on the electromagnetic constraint to a state of suspension, guarantees the ingot casting side surface in the condition of free surface solidification, does not weaken the electromagnetic stirring effect of liquid cavity, inherited the electromagnetic casting ingot surface brightness and density of the internal organization.
Hot top electromagnetic casting technology which give full play to the advantages of the ordinary electromagnetic casting and electromagnetic casting and to enhance the operability of the system, and the magnetic field intensity and magnetic pressure distribution is reasonable, can effectively control the ingot casting inclusion and improve the quality of ingot casting surface and internal.
Q Are you a manufacturer or a trader?
A
We have our own foundry ,forging factory and machinery shop located in Liaoning Province, China.
Q What can you do for customer?
A
One Stop Service
1).Manufacturing and supply various machinery parts.
2). Technical analysis and design
3).Factory audit, on-site production supervision, in-time feedback, pre-shipment quality inspection
Q How could you commit the product quality?
A
1) all our factories were ISO certified.
2) more than 50% of New Densen’s products were sold to worldwide top 500 companies
which located in North American, Western Europe, and Japan.
3) New Densen’s QC engineers will do on-site supervision and before EX-work quality inspection. New Densen will issue inspection reports for customers’ approval before EX-work. New Densen will be responsible for its reports and every parts no matter how long sold to customers.
Q How long shall we get the quotation?
A
Processing time for inquiry: 1-3 working days.
Q What's the process of developing a new steel casting product?
A
The procedure for new project develop as below:
1. Technical department analyze the drawings all details
2.Pattern design and manufacture
3.Casting Process
4.Quality Control inspect the casting parts
5.Issue inspection report for customer to check quality
6. After inspection report approved, Logistics Department help arrange the shipping to customer
English
