The basic structure of magnetic separator

Publish Time: 2016-11-25     Origin: Site

Small make up today for everyone to introduce in detail what are the basic structure of magnetic separator.
 
Magnetic separator, the basic structure of the wet type permanent magnet drum magnetic separator is mainly composed of the cylinder, magnetic system, tub of four parts, transmission parts.Cylinder by 2-3 mm stainless steel plate welded tube, end cover for casting
 
1, the basic structure of magnetic separator
Wet type permanent magnet drum magnetic separator is mainly composed of cylinder, magnetic system, tub of four parts, transmission parts.Cylinder by 2-3 mm stainless steel plate welded tube, end cover for cast aluminum, stainless steel screw and barrel.Motor through reducer, drive cylinder rotary motion.Magnetic system for open magnetic system, within the cylinder.Magnets with stainless steel bolts in a yoke on the floor, out shaft tube yoke, end fixed turn arm.Can adjust the magnetic pull (turn arm Angle, can be used after adjusting rod fixation.Tub's work area made of stainless steel plate, frame and other parts of the tub with ordinary steel welding. 
2, the working principle of magnetic separator
Pulp after feed box into the tub, in the feed water flow under the action of water spray, the particles in loose state into the tub to the mining area.In the role of magnetic field, magnetic magnetic mineral grains occur together and form "magnetic group" or "magnetic chain", "magnetic group" or "magnetic chain" in the pulp by the magnetic force function, the movement to the poles, and adsorb on the cylinder.Due to the polarity of the magnetic poles along the cylinder rotation direction are arranged alternately, and fixed at work, "magnetic group" or "magnetic chain" in the cylinder rotates, with alternating polarity magnetic stirring, was mixed in the "magnetic group" or "magnetic chain" of the gangue and other non-magnetic minerals in turn off, has finally been sucked on the surface of the cylinder, the "magnetic group" or "magnetic lotus" is to concentrate.Concentrate with the cylinder to the edge of the magnetic magnetic department at the weak point, in mine hoses flushing water flow under the action of discharge to concentrate slot.Non-magnetic or weak magnetic minerals in pulp with slurry discharge groove, known as tailings.
 
Above is about the structure of the magnetic separator is introduced, the hope can help to you.

Sand Casting

Silicon Sol Process in Precision Casting Applications

Uncovering The Art of Sand Casting: A Time-honored Casting Technique

Mastering the Art of Metal Casting: A Comprehensive Guide to the Casting Craft

Introduction To The Casting Process: Revealing The Art And Science of Metal Casting