Magnetic separator how to choose the thickness uniformity of the material
Publish Time: 2016-09-14 Origin: Site
Magnetic separator is more and more popular in the mineral processing, with the emergence of more magnetic separation equipment, magnetic separation machine manufacturer's competitiveness is becoming more and more big, henan hongxing mining machinery co., LTD., according to the actual needs of customers, specially designed for the magnetic separator system parts with the same price to build higher yield, economic and practical machinery.My company based on magnetic separation of finished products, how to make magnetic separation issued a uniform thickness of the material, today we in dry magnetic separation machine for example to give customers make a further explanation:
1, adjust the gap between the magnetic roller and plate
Points plate with magnetic roller spacing is an important parameter in the primary technology, material baffle spacing is smaller, lean magnetite piece is not good, reduces the utilization of mineral resources;Points is the baffle spacing, the greater the gangue mineral is not a better separation, into the mill scale is reduced, unfavorable to choose power forward.According to the ore properties and adjusted score board with the roller spacing, have abundant thrown gangue together to ensure that the magnetic goods fully recycling, ensure that the recovery rates of dry cleaning concentrate.
2, adjust the height of the dry type magnetic separator points plate
Magnetic separator points material baffle plate directly affects the magnetic separator separation effect, a partition is too low, makes extremely lean magnetite piece is not good, reduces the utilization of mineral resources;Thrown a partition is too high, the gangue minerals is incomplete, dry magnetic separation machine choose don't affect.According to the specific situation adjust the height of the dry separating plate, make the dry separation can not only ensure must tailings, and can make the magnetic mineral get good throw.
3, add a feeder, try to make the dry material thin and uniform
In general, the farther drum magnetic separator interval appearance, the more fierce, magnetic damping material through the thick make magnetic particles and the non-magnetic particles mingled with each other, and influence the ore sorting, if can finish the particles in the belt with a single scattered the most ambitious.For dry cleaning before adding material feeder layer of flat, use the useful width of the belt as far as possible, make the dry material thin and uniform, ensure that dry separation effect.