Part of the technical requirements on the one hand affect the performance of the parts, on the other hand is directly related to economic and feasibility of the manufacturing process. People often ask casting mold parts processing which technical requirements, the following simple analysis of this issue.

Machinery and equipment liquid steel in aluminum permanent rapid injection process, called aluminum die-casting process, the mold after cooling molding, high production efficiency and repeatable. With high efficiency, high precision, good surface quality, the subsequent processing of simple features. Prior to the factory for aluminum die casting for testing to ensure to be able to put to use are qualified products, the specific criteria:

Today Xiaobian summarize some time stainless steel stamping elbow during the welding operation should be noted that:

Solenoid valve is a solenoid magnetic occur attract stretched spring to overcome the pressure of the femoral artery and valve operation after power, simple structure, low price, can only end switch; electric switching valve is divided and Conditioning. Off valves are two type of job that is fully open and fully closed, the control valve is in the above device electric valve positioner, through the valve to the closed-loop conditioning in a dynamically stable position.

The liquid metal molding process is called casting, poured into the liquid alloy in the mold of a good custom,When the temperature decreases the formation of molded castings.Sand casting, die casting, investment casting, shell casting, lost foam casting, low pressure casting, gravity casting is to distinguish according to the method of casting process.

According to the pressure ,according to the medium temperature,according to the valve body material.

Ball Valve is evolved from plug valve,with the same opening and closing action.The difference is the Valve core rotator is not a plug but a ball. When ball rotated to 90 degrees,the inlet and outlet all shows ball surface,then to truncate the flow.

Today, the rapid growth of China's machinery industry has gradually bid farewell to the era, the industry adjustment and transformation is now an urgent need to do, due to the rapid development caused prolonged create some problems and have become increasingly prominent, innovation capability is weak, structural imbalance and other issues have become restricting the development of China's machinery industry several short board.

Machining parts processing flow is the most basic step, because in the process of machining parts, heat will continue to increase thus making it some of the force generation role, in part because the whole process of the force will fluctuate, so parts on the machining accuracy will be reduced. According to the selected parts of the material, size, heat treatment requirements, and fine processing, etc., is the basic form of the machining process.

China's Casting industry is the rapid development is at an important stage in the transformation and upgrading of high-end, high-end casting products, and now the mainstream of China's foundry industry gradually into the aluminum alloy as the representative of all kinds of light alloy products. In the casting section of this trend will be reflected.