The relief valve and working principle of the float valve

Views: 67     Author: Site Editor     Publish Time: 2016-09-19      Origin: Site

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
telegram sharing button
sharethis sharing button

Ball valve is a kind of use a sphere as a closing of the valve, the valve body, valve seat, mainly for the sphere, the valve stem and handle (or other drive).Driven by the valve stem, and around the ball valve axis of rotation.Mainly used in the pipe used for cutting or distribution and the change of flow direction of medium.There are many different kinds of ball valves, including its action principle and medium and application fields of different, today small make up to introduce the relief valve and the working principle of the float valve.
The relief valve and working principle of the float valve
The working principle of the float valve
Accused of floating ball valve is love by rotary valve to keep the valve open or occlusion.Ball valve switch lightweight, small size, can make it big caliber, reliable sealing and structure?Simple, easy maintenance, sealing surface and the spherical often in the closed state, not easily be medium erosion, has been widely used in various industries.
Remote control float valve is love by rotary valve to keep the valve open or occlusion.Ball valve switch lightweight, small size, can make it big caliber, reliable sealing, simple structure, convenient maintenance, sealing surface and the spherical often in the closed state, not easily be medium erosion, has been widely used in various industries.When the water pipe from the inlet end, because of the needle valve, ball valve, floating ball valve is normally open, water through the micro filter, needle valve, control room, ball valve, floating ball valve into the pool, the control room not formation pressure, the main valve opens, the water tower water supply (pool).
Rose to the surface of the water tower (pool) setting height, floating ball float close floating ball valve, control indoor water pressure increases, promote the main valve closed, stop water supply.When the water drop, floating ball valve reopens, control the water pressure drop, the main valve to open again continue to water supply, set to keep the liquid surface height.
The relief valve and working principle of the float valve
The working principle of the relief valve
Safety valve is open-close part under the action of external force in a normally closed state, when the equipment or piping within the medium pressure than specified value, through a discharge medium system to prevent the pipeline or equipment within the medium pressure in excess of the prescribed value.So, what is the working principle of the relief valve?
When the relief valve disc, the steam pressure exceeds the pressure of the spring force, the valve is open.Open valve, discharge steam due to the rebound of the adjusting ring effect on disc clamping ring, quickly open the valve.As the disc up, steam impact on the adjusting ring, lead to the vertical direction of exhaust steam down, pushing the reaction of the exhaust steam to produce disc upward, and within a certain range of pressure to keep the disc on the hoisting height enough as the safety valve open, steam discharge, the steam pressure gradually reduced in the system.At this point, the spring force will overcome the vapor pressure on the disc and exhaust steam reaction, so as to close the valve.
 
Above on the relief valve and the working principle of the float valve is introduced here.

  • Q Are you a manufacturer or a trader?

    A
    We have our own foundry ,forging factory and machinery shop located in Liaoning Province, China.
  • Q What can you do for customer?

    A
    One Stop Service
    1).Manufacturing and supply various machinery parts.
    2). Technical analysis and design 
    3).Factory audit, on-site production supervision, in-time feedback, pre-shipment quality inspection
  • Q How could you commit the product quality?

    A
    1) all our factories were ISO certified. 
    2) more than 50% of New Densen’s products were sold to worldwide top 500 companies 
    which located in North American, Western Europe, and Japan.
    3) New Densen’s QC engineers will do on-site supervision and before EX-work quality inspection. New Densen will issue inspection reports for customers’ approval before EX-work. New Densen will be responsible for its reports and every parts no matter how long sold to customers.
  • Q How long shall we get the quotation?

    A
    Processing time for inquiry: 1-3 working days.
  • Q What's the process of developing a new steel casting product?

    A
    The procedure for new project develop as below:
    1. Technical department analyze the drawings all details 
     
    2.Pattern design and manufacture
     
    3.Casting Process
     
    4.Quality Control inspect the casting parts
     
    5.Issue inspection report for customer to check quality
     
    6. After inspection report approved, Logistics Department help arrange the shipping to customer