The mechanical properties, chemical composition of welding materials
Views: 3 Author: Site Editor Publish Time: 2016-11-07 Origin: Site
People believe that a lot of books to know welding material, then how many people know that mechanical energy and chemical composition of the welding material?
A. for low carbon steel, medium carbon steel and low alloy steel, can be used with the base strength grade corresponding electrode, the tensile strength equal to or slightly higher than the parent metal.When the force is complex, should choose level lower than the strength of parent metal electrode, has to ensure that the weld strength, and can have the satisfaction of plastic.
B. for alloy structural steel, usually require the same alloy components of weld metal and base metal or similar.
C. in the welding structure complex, high rigidity, joint stress, weld crack generating cases, can consider to choose level lower than the strength of parent metal electrode.
D. C.P, S in the parent metal element content on the high side, such as weld crack generating cases, should choose good low hydrogen type electrode crack resistance.
E. after the strength of the electrode to determine, for plastic, high impact and crack resistance, low temperature under the working conditions of weld should choose basic electrode.
F. when welding joint place more rust, scale, water and oil dirt, and failing to clean up, should choose to rust, oil, and small scale, water sensitivity and stomatal resistance strong acid electrode.
G. low carbon steel and low alloy steel, low alloy steel with different levels of intensity between dissimilar steel welding, such as general selection and low strength grade steel matching electrode.
That is about the welding material mechanical properties, chemical composition of the related introduction, hope can help to you.
Q Are you a manufacturer or a trader?
A
We have our own foundry ,forging factory and machinery shop located in Liaoning Province, China.
Q What can you do for customer?
A
One Stop Service
1).Manufacturing and supply various machinery parts.
2). Technical analysis and design
3).Factory audit, on-site production supervision, in-time feedback, pre-shipment quality inspection
Q How could you commit the product quality?
A
1) all our factories were ISO certified.
2) more than 50% of New Densen’s products were sold to worldwide top 500 companies
which located in North American, Western Europe, and Japan.
3) New Densen’s QC engineers will do on-site supervision and before EX-work quality inspection. New Densen will issue inspection reports for customers’ approval before EX-work. New Densen will be responsible for its reports and every parts no matter how long sold to customers.
Q How long shall we get the quotation?
A
Processing time for inquiry: 1-3 working days.
Q What's the process of developing a new steel casting product?
A
The procedure for new project develop as below:
1. Technical department analyze the drawings all details
2.Pattern design and manufacture
3.Casting Process
4.Quality Control inspect the casting parts
5.Issue inspection report for customer to check quality
6. After inspection report approved, Logistics Department help arrange the shipping to customer
English
