The classification and characteristics of pneumatic ball valve

Views: 0     Author: Site Editor     Publish Time: 2016-09-18      Origin: Site

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
telegram sharing button
sharethis sharing button

About everyone knows how much the pneumatic ball valve, the following is to introduce the pneumatic ball valve.
 
Pneumatic ball valve and ball valve has a O V type ball valve.O-type ball valve structure of floating type, ball core for precision casting, hard chromium plating processing, appearance with enhanced ptfe seat material, flow crossing the same as the pipe diameter, flow capacity, little flow resistance, closing without leakage, generally do switch valve is used, especially suitable for high viscosity, v-shaped ball valve fixed structure, ball core open v-shaped incision, which can realize shear fiber, granular media.
The classification and characteristics of pneumatic ball valve
Process equipment under different choice of pneumatic or electric actuators, forming an and electric ball valves, pneumatic ball valve such as pneumatic ball valve must be regulated to achieve proportional valve positioner, such as the electric ball valve to be regulated to achieve proportional election electronic actuators or servo amplifier, etc.
 
From the material, can be divided into: carbon steel ball valve, 304 stainless steel ball valve, 316 copper ball valve and ball valve
 
According to the pressure, can be divided into: high pressure ball valve and low pressure ball valve
 
High pressure pneumatic ball valve: mainly used in oil, gas, hydraulic oil, engineering machinery and other industries
The classification and characteristics of pneumatic ball valve
Low pressure pneumatic ball valve: mainly used in corrosion medium such as water pipe on the road!Type knife gate valve products in use the matters needing attention and its model: type knife gate valve opening and closing is ram, ram movement direction perpendicular to the direction of flow and the manual type knife gate valve can only be fully open and close, not to adjust and throttling.Sealing face has two gate, two of the most commonly used mode gate valve sealing surface form a wedge, the wedge Angle vary with the valve parameters, usually in the form of 50, wedge type knife gate valve disc can be made into a whole, is called a rigid disc;Can also make it generates trace of deformation of ram, in order to improve the manufacturability, make up for the sealing surface Angle in the process of our processing deviation, the gate is called elastic disc type knife gate valve is closed, sealing surface can only rely on medium pressure to seal, that depend on medium pressure, the disc will be to the other side of the valve seat sealing surface pressure to ensure that the seal face seal, this is the seal.Most type knife gate valve is made mandatory sealing, the valve is closed, to rely on outside force forced the ram pressure to the seat, to ensure the sealing surface of this kind of valve sealing shall generally be installed in the pipeline.
 
That is about the classification and characteristics of pneumatic ball valve, hope can help to you.
 

  • Q Are you a manufacturer or a trader?

    A
    We have our own foundry ,forging factory and machinery shop located in Liaoning Province, China.
  • Q What can you do for customer?

    A
    One Stop Service
    1).Manufacturing and supply various machinery parts.
    2). Technical analysis and design 
    3).Factory audit, on-site production supervision, in-time feedback, pre-shipment quality inspection
  • Q How could you commit the product quality?

    A
    1) all our factories were ISO certified. 
    2) more than 50% of New Densen’s products were sold to worldwide top 500 companies 
    which located in North American, Western Europe, and Japan.
    3) New Densen’s QC engineers will do on-site supervision and before EX-work quality inspection. New Densen will issue inspection reports for customers’ approval before EX-work. New Densen will be responsible for its reports and every parts no matter how long sold to customers.
  • Q How long shall we get the quotation?

    A
    Processing time for inquiry: 1-3 working days.
  • Q What's the process of developing a new steel casting product?

    A
    The procedure for new project develop as below:
    1. Technical department analyze the drawings all details 
     
    2.Pattern design and manufacture
     
    3.Casting Process
     
    4.Quality Control inspect the casting parts
     
    5.Issue inspection report for customer to check quality
     
    6. After inspection report approved, Logistics Department help arrange the shipping to customer