Pipeline ball valve classification and USES

Views: 0     Author: Site Editor     Publish Time: 2016-10-08      Origin: Site

Ball ball valve is used with a circular channels as opening and closing, the sphere with the valve rod rotation realize on-off movement.ball valve is rotated 90 degrees, the cock body for a sphere, a round hole or tunnel through its axis.Ball valve in the line is mainly used for cutting, distribution, and change the flow direction of medium, it just has to rotate 90 degrees of operating and small rotational torque can be closed tightly.
 Pipeline ball valve classification and USES
Ball valve can be divided into: floating ball ball valve and the fixed ball ball valve, V type ball valve, sulfur discharge ball valve, ball valve, plastic ball valve, card sets of ball valves, welding ball valve, air valve, one-piece ball valve, chip ball valves, threaded ball valve, through ball valve, three-way ball valve, four-way valves, insulation ball valve, ball valve, pipeline ball valve, rail cant ball valve, anti-corrosion ball valve, etc.
 Pipeline ball valve classification and USES
Common ball valve main standards, specifications, and parameters:
1, the ball valve pressure rating: PN1.0-32.0 MPa, 150 lb to 900 lb, JIS10-20 k.
2, ball valve nominal diameter: DN6 - DN800, 1/4 "- 36".
3, ball screw thread standard: G thread, mid-december, thread, such as NPT thread, BSPT thread.
4, ball valve connection mode: flange, butt welding, thread, socket welding, welding, card sets, etc.
5, ball valve applicable temperature: 196 ℃ - 0 ℃ 0 ℃ ~ 540 ℃.
6, ball valve drive mode: manual, worm gear and worm drive, pneumatic, electric, hydraulic, pneumatic hydraulic linkage, electro-hydraulic linkage.
7, the valve body material: WCB, ZG1Cr18Ni9Ti, ZG1Cr18Ni12Mo2Ti, CF8 (304), CF3 (304 l), CF8M (316), CF3M, chrome molybdenum steel (316 l).
 Pipeline ball valve classification and USES
Twin towers - ball valve material can choose according to use media, can be respectively suitable for water, steam, oil, nitric acid, acetic acid, oxidizing medium, urea, and other media.

  • Q Are you a manufacturer or a trader?

    We have our own foundry ,forging factory and machinery shop located in Liaoning Province, China.
  • Q What can you do for customer?

    One Stop Service
    1).Manufacturing and supply various machinery parts.
    2). Technical analysis and design 
    3).Factory audit, on-site production supervision, in-time feedback, pre-shipment quality inspection
  • Q How could you commit the product quality?

    1) all our factories were ISO certified. 
    2) more than 50% of New Densen’s products were sold to worldwide top 500 companies 
    which located in North American, Western Europe, and Japan.
    3) New Densen’s QC engineers will do on-site supervision and before EX-work quality inspection. New Densen will issue inspection reports for customers’ approval before EX-work. New Densen will be responsible for its reports and every parts no matter how long sold to customers.
  • Q How long shall we get the quotation?

    Processing time for inquiry: 1-3 working days.
  • Q What's the process of developing a new steel casting product?

    The procedure for new project develop as below:
    1. Technical department analyze the drawings all details 
    2.Pattern design and manufacture
    3.Casting Process
    4.Quality Control inspect the casting parts
    5.Issue inspection report for customer to check quality
    6. After inspection report approved, Logistics Department help arrange the shipping to customer