Fever that solve the magnetic mechanical and electrical machine

Views: 1     Author: Site Editor     Publish Time: 2016-09-19      Origin: Site

Dry type magnetic separator is one of the indispensable equipment in the mineral processing equipment, is the material of magnetic characteristics of the ore concentrate can choose other production is extremely strong, widely used in particle size 3 mm below the magnetite, pyrrhotite, roasted ore and ilmenite wet magnetic separation of materials, also used in coal, non-metallic mineral, building materials and other materials in addition to iron.Very suitable for arid area.Dry magnetic separation machine in the process of production will meet motor fever phenomenon.Today, gongyi city xin di mining machinery factory, for everyone to introduce the cause of the dry magnetic separation mechanical and electrical machine fever.
 Fever that solve the magnetic mechanical and electrical machine
The cause of the dry magnetic separation mechanical and electrical machine overheating:
 
1. Magnetic bearing parts of the mechanical and electrical machine lubrication condition is bad, the friction heat;
 
2. The motor wiring adverse or switch attachment misconnection or wire break will result in higher abnormal motor calorific value;
 
3. The motor voltage is too low increased load leads to abnormal heat.
 
4. Bearing worn parts caused by friction heat;Motor fan leaf, gear and worm any parts of wear damage will strengthen its work calorific value;
 Fever that solve the magnetic mechanical and electrical machine
The cause of abnormal noise from the dry type magnetic separator are:
 
1. The poor lubrication bearing abnormal sound in operation;
 
2. Magnetic separator cylinder is material formation blocked or jammed phenomenon;
 
3. The bearing, fan leaf wear will produce abnormal sound.
 
In order to avoid abnormal electrical heating and abnormal sound, so you need to check the bearing lubrication situation of running parts, such as motor start to check the wiring is correct before, to found the wear loose parts timely maintenance after replace new parts, pay attention to during the process of producing magnetic separator feeding to continuous uniform, minimize clogging failure.