Densen Customized trommel screen and trommel sand sieve in Sand Gravel Stone size Separating for size screening

Brief introduction:

Rotary drum screen(trommel screen) can screen the following materials: black earth, compost, organic waste, green waste, wood waste (bark, sawdust, woodchips etc), domestic refuse, municipal waste, recycled asphalt, concrete, slag coal, sand, gravel, sone, clay, alluvial gold sand and many other materials.

How to work:

A trommel screens material by spinning a drum, usually with some kind of paddles or bars running inside the length of the tube to catch and lift the passing debris. Once picked up, gravity takes over and the debris falls back down, causing a break up of the material (as it tumbles).

This process is repeated until the debris is small enough to pass through the screen (fines) while the larger debris exits through the opposite end of the trommel drum. This produces two products, one of a finer soil and one of rocks, roots, wood waste, etc., which is referred to as rejects, overs, or trash.

Advantages of Municipal Solid Waste Management  Waste Recycling Machinery Trommel Screen:

a . The installation angle is small, easy to plug

b . Small footprint

c . Low noise and dust pollution

d . Smooth operation

e . Screening efficiency is high

f. Large output

g . Simple process layout

Specification:

Product show:

Separated Material:

Example drawing part:

We will send you the formal drawing as your requirment before the production.

Our factory is Located in shanyang ,China, which is a professional enterprise producing magnetic series products. Our factory has been focusing on designing and manufacturing magnetic equipment for 12 years since 2006.We are one of the earliest suppliers of magnetic separator and eddy current separator in Asia. Main products are Eddy current separator, magnetic separator, belt magnetic separator, Drum magnetic separator and Grate magnets. 

 Our Advantage:
1. We have 13 years of professional production experience, and we are one of the earliest manufacturer of eddy current separator in China.
2. We have a technical engineer team with 10 engineers who have more than 25 years of working experience in eddy current separator.
3. In the list of 98 China National fixed appliances dismantling of the plant, there are 55 factories use our equipment. It can be proved through the website of the China’s Ministry of Commerce.   
4. We have provided different solutions for more than 500 users at China and abroad. We have rich experience in equipment’s actual use and Practical experience in case handling, which can fully solve various problems of customers.   

Factory photo:

At the exhibition:

More our product

More industry

Treatable material

1. Before production, we will send the drawing of the product according to your requirements.

2. During the production process, we will regularly send you the production situation and pictures.

3. We will test the equipment before shipment, such as the magnetic intensity test, rotor dynamic balance experiment. And send you the photo and the video.

4. Warranty: 1 year. We will provide non-vulnerable accessories free during the warranty If you have any question, we will provide online video guidance. If online video guidance can not solve the problem, we will send engineers to your site for guidance. (Room and board expenses are negotiated separately.)

With well-equipped professional engineers and strong technical ability, our company has been in this field for 15 years.

1. We cooperate with superior suppliers (Nord &Schneider) to ensure the quality.

2. Tests of materials are freely checked for the required quality of the equipment before packing.

3. Engineers are always available to service for machinery commissioning overseas, which is not only after sales service support, but also technology support .

4."Keep Improving, Pursuing Excellence" would be kept forever.

Our certification:

1. Wet type

 In order to recommend the most suitable model, please let us know the material`s situation, including the composition , size ,handling capacity and ferrous content.

2.Dry type

In order to recommend the most suitable model, please let us know

1.the material`s situation .including the composition , size ,handling capacity and ferrous content.

2.the material thickness transported on conveyor .

3.The width of conveyor bel

3.Which type should I use for my recycling plant?

In order to recommend the most suitable model, please let us know follow info:

1.material`s situation .including the composition , size ,handling capacity and ferrous content 

2.the material thickness transported on conveyor belt.

3.The shape and width of the conveyor belt .

We solemnly promise a one-year warranty.